How I got my Dell Inspiron 7567 i5-7300HQ to boot 10.16 Installer USB by – ben wanderer

!!!

ATTENTION / WARNING

!!! PLEASE DO BE AWARE THAT THIS METHOD (MORE THAN LIKELY) IS HARDWARE SPECIFIC (DELL INSPIRON 7567 i5-7300HQ). I HAD TO DISABLE CFGLOCK VIA MODGRUB.EFI. I TAKE ZERO LIABILITY/RESPONSIBILITY IF YOU MESS UP YOUR DESKTOP/LAPTOP BY FOLLOWING THIS!!

First: You have to create your pre-built OpenCore folder, (I recommend updating it to the latest commit from GitHub.com/acidanthera/opencorepkg and building it via macOS terminal. Be sure you have XCODE 12 beta installed on your build machine, for extra good measure and to ensure success with the process).

Second: Once that is updated make sure that you’ve updated necessary kexts (available from GitHub dev commits and place them into their correct corresponding folders.

Third: Make sure you disable CFG lock in your bios via modgrub.efi (I will not go into detail on this for it is different per each machine).

Fourth: Once you’re done with disabling the CFG lock on your machine, make sure you run verifymsr.efi in your OC loader. Make SURE that it shows ALL CPU cores, at that point you should have proper power management and XCPM working.

Fifth: Change CPU-PM and XCPM locks from “True” to “False” in your OC config.plist.At this point if all has been done both correctly AND successfully, you should be able to / ready to run the MacOS Big Sur beta 1 or 2 installer from a USB stick on your machine.

Opencore and Big Sur

Is OC updated?

Partially. AvoidRuntimeDefrag is fixed for macOS 11 but you still need to bypass stage 2 somehow, as OC doesn’t have support for injecting into the new Kernel Collection format yet.

When will it have support? We don’t know at this stage.

How do I install? Currently, the best way is to install it on an external SSD or NVMe on a Mac Pro, if you have one, then booting it on a hack.

But I don’t have a Mac? You can try a VM, but it will be slow. VMware Fusion and VirtualBox and Parallels have been reported successful.

What do I need to boot after VM Transferl?
NVRAM > Add >7C436110-AB2A-4BBB-A880-FE41995C9F82 > booter-fileset-kernel – type Data – value 00
NVRAM > Delete > 7C436110-AB2A-4BBB-A880-FE41995C9F82 > type String – value booter-fileset-kernel

Will will need to make sure you have the latest Lilu, VirtualSMC and OC 0.6.0
with Bootargs -lilubetaall and vsmcgen=1

AvoidRuntimeDefrag no longer needs to be off with OC from the latest master build. Some stuff isn’t working! Some kexts need to be updated, so you’ll need to hang tight. Lilu, AppleALC, VirtualSMC, and WhateverGreen have been partially updated. Remember, this is a beta version of macOS. If you don’t have a somewhat stable normal install, having trouble with this process, or don’t have a good knowledge of hackintoshing, it’s best to wait until it’s easier to do. THERE IS NO SUPPORT CURRENTLY FROM ANY HACKINTOSH SERVER